Description

S&A CW-5000/CW-5200 compact water chillers CE,RoHS and REACH

S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in ±0.3℃ precision. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted.

CW-5000 video: http://www.teyuchiller.com/Article/02SAwaterchillerCW5000_1.html

CW-5000 water chiller parameter:

Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a

Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L

Max. lift:10M-25M; Max. flow: 10L/min- 16L/min

N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) 

CW-5000 specification:

CW-5000AG: applied to cool a single 80W CO2 laser tube (emitting rate higher than 60%);

CW-5000AH: applied to cool a single 5KW spindle or welding equipment;

CW-5000AI : applied to cool a single 5W-10W solid-state laser. 

S&A brand CW-5200 water cooler ‘s cooling capacity up to 1.4KW , ±0.3℃ temperature control precision and temperature control range in 5-35℃. It is popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.

S&A chillers have passed ISO, CE,RoHS and REACH approvals and the warranty is 2 years.

CW-5200 video: http://www.teyuchiller.com/Article/03SAwaterchillerCW5200_1.html

chiller CW-5200 parameter:

 Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-134a / R-410a

Pump power: 0.03KW/0.05KW/0.1KW; Tank capacity:6L

Max. lift:10M-25M; Max. flow: 10L/min- 16L/min

N.W: 26Kgs; G.W: 29Kgs;

Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)

CW-5200 specification:

CW-5200AG: applied to cool a single 130W CO2 laser tube

CW-5200AH: applied to a cool a single 8KW CNC spindle, welding equipment or two 100W CO2 laser tubes.

CW-5200AI: applied to a cool single 50W-75W laser diode, a single15W-30W solid-state laser or a single 30W RF laser tube;

Optional: CW-5202 dual water inlet and outlet series; heat booster; water filter.

About S&A Brand

S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees. With annual production capacity for cooling system up to 60,000 units, the product has been sold to more than 50 countries and regions. S&A has established a complete and strict quality management system to realize the strict control on the acquisition of components, the equipment production, the delivery and the after-sales service. As the saying goes, sharp tools make good work. Since condenser is the center of an industrial water chiller, S&A has invested millions of money in condenser production equipment and made strict control on a series of processes, including fins, bends and welding etc. to secure the quality of condenser. Also the introduction of welding robots has significantly improved and perfected the welding procedure. Therefore it can efficiently prevent the machinery breakdown caused by solder skips. This is also the main reason that why S&A water chiller has stable quality.

CONTACT S&A

SKYPE: teyuchiller ;  Email:marketing@teyu.com.cn;

Website: http://www.teyuchiller.com

TE:+86-20-89301885;  FAX:+86-20-84309967