|
Introduction
IPL-10 is based on IPL (Intense Pluses Light) technology which is regarded as the most effective and safest in today’s markets. The FDA’s definition of permanent hair reduction states that after the treatment is Finished a minimum of 30 months without any growth must be observed. IPL-10 is the most innovative hair removal device for use in privacy of your own home.
To achieve hair removal, it is necessary not only to destroy the hair but to destroy the stem cells that create the hair. It is important to understand that the hair is only a conduit for the light energy, and the target for successful permanent hair reduction is to destroy the stem cells that make the hair follicle, the IPL-10 home hair removal device is a small, portable IPL. The specifications for the device include wavelengths of light from 475 to 1200mm.
Treatment Plan with IPL-10
Treatments should be carried out every 2-4 weeks for at least 3 sessions, and up to 7-8 if necessary. After 6 months of sessions full results(70-90%) should be achieved.
|
|
Select the color that best matches the color of the on the area you are testing. Don’t use IPL-10 on naturally dark skin. Treating dark skin with IPL-10 can result in adverse effects such as burns, blisters and skin color changes.
(Hyper or hypo-pigmentation)
Tips for your first treatment session with IPL-10
You should start with the low setting for the first time and increase to the medium or high settings based on your comfort level. Energy level determines the intensity of the IPL-10 light pulse delivered to your skin, from the lowest level (-) to the highest level (+), as energy level increases, so does hair removal results as well as the risk of possible side effects and complications. You should use lower setting if you are experiencing pain; the area is flushed or has blotches.
How To Use What to expect
The skin should be shaved, clean, dry and free of any powders, antiperspirants or deodorants.
- 1. Press the power on/off switch to turn on IPL-10
- 2. Shortly after pressing the power on/off switch, the ready indicator light will turn on, accompanied by a beep, to
indicate that your IPL-10 is ready for its first pulse.
- 3. Your IPL-10 is automatically set to the lowest energy level.
- 4. Using firm pressure, apply the applicator tip to the skin. Be sure that the skin area you are about to treat is spread
- evenly and smoothly, and that the applicator tip is full contact with the skin.
- 5. Press the pulse button to emit a pulse. You will than see a flash of light and hear a pop sound.
This is normal light pulse of IPL-10.
- 6. After emitting a pulse, remove the applicator tip from the skin. IPL-10 is recharge for the next pulse.
- 7. After approx. 4-7 seconds the ready indicator light will turn on again, accompanied by a beep, to indicate that your
IPL-10 is ready for another pulse.
- 8. Continue to administer pulses until the desired skin area is fully treated.
|
- 100-240 universal power
- Less noise Fan
- Long-term results
- Skin color sensor
- Effective on women and men
- Physician Recommended
- Cost Effective
- Privacy at home
- Safe and easy to use
Disposable Lamp Cartridge
IPL-10 disposable lamp cartridge can deliver 3000-8000 shot that typically cover two legs, arms, under arms and bikini
lines. Energy intensity is determined only according to the energy level setting of the device.
Skin Color Sensor
|
|
The skin color sensor light based hair removal on darker skin tones can result in adverse effects such as burns, blisters and skin color changes (hyper or hypo-pigmentation) . To prevent such misuse, a unique SKIN COLOR SENSOR in IPL-10 measures the treated skin complexion at the beginning of each session and occasionally during the session. If the SKIN COLOR SENSOR detects a skin tone that is too dark for IPL-10 application, the device will automatically stop emitting pulse.
|
|
Includes
Unit, lamp cartridge, AC cord, goggle , manual .
Laser Safety Goggle
|
